You can get human customer support in the following ways，Our working hours are 9:30-24:00 Beijing time。
You can email us for customer support：we@letianpai.com
Open https://www.facebook.com/RuxRobot ，Send Message to me
Use Wechat to scan the QR code below to add our customer service manager.
What is the Assisted Recharging function? The auxiliary Assisted Recharging allows the robot to return to the charging station within a desktop area using AI vision and infrared guidance, and it enables the robot to enter the wireless charging process. OTA will be launched on January 21st, and will be able to be used with…
Environment: Windows, the following demonstration environment is Windows 11 Prepare the flashing tool: USB driver package download address: https://cdn.file.letianpai.com/c30446f3ed36e314dd86927564b30832/factory_release/Tools/驱动包-DriverAssitant_v5.1.1.zip RK flashing tool download address: https://cdn.file.letianpai.com/c30446f3ed36e314dd86927564b30832/factory_release/Tools/RKDevTool_Release_v2.95.zip Prepare system installation package: Ordinary User Release version system installation package download address (The latest system package is geeui 1.201293.u version): https://d4owc89rbj03p.cloudfront.net/ota/geeui_1.2.01293.u_firmware_image/update.img.zip Steps for flashing: Step 1: Install the USB…
Rux Robot comes with a built-in dual system. After upgrading to the full root access version of the ROM, it’s possible to switch the operating system running on the robot from Android to Linux for development purposes. However, it’s important to note that this operation is recommended for advanced users only. The robot’s built-in Android…
The Rux Robot AI voice engine provides users with multiple choices. If the user does not set up an AI voice engine, Rux Robot’s voice assistant will default to using the System Voice Assistant GPT version (trial). Users can also switch and choose to open any AI voice engine for dialogue based on their own…
Need to prepare tools Flashing process 2. Press and hold the reset hole of the robot with a card pin to shut it down. 3. Refer to the video to open the screen panel of the robot 4. Use a USB-C data cable to connect the robot, keeping the other end of the USB-C data…
Step 1: Download the robot factory recovery tool https://cdn.file.letianpai.com/c30446f3ed36e314dd86927564b30832/factory_release/Tools/scrcpy-win64-tools-v1.zip After downloading, decompress it. Then enter the directory scrcpy-win64-tools-v1 Step 2: Connect the robot to the computer via a USB data cable Step 3: Double click to open the scrcpy restore_factory.bat file The robot will automatically perform factory recovery. After the recovery is completed, the robot…
